Support

Universal active DIN rail mounted splitter. It has four active outputs (amplifiers) and one passive output (without amplifier). It allows the connection of up to 5 receivers or splitting the main bus into 4 independent outputs. It is also possible to connect another distributor or to terminate the main bus.
The active outputs allow direct connection of receivers at a distance of max. 70 m (with appropriate system configuration).
The distributor has additional fuses on each output that disconnect the output from the system, signaling this with an LED.
One of the active outputs is additionally amplified which allows to eliminate video signal loss at long buses.
Monitoring of supply voltage and line status is indicated by “status LED”.
It has an additional screw output for connecting the audio line. Mounted on the bulidings floors, at the collection point of the installation or at the bus splitting point. It can be powered from the main bus or from an external 15V power supply (built-in jumper to cut off the bus power), supplying the output devices. The distributor is resistant to cable damage.
Designed for DIN rail mounting (occupies a width of 4 DIN modules) and surface mounting.
Compatible with all digital devices from the groups: CDNP, Inspiro and Familio P/PV.

Universal active DIN rail mounted splitter. It has four active outputs (amplifiers) and one passive output (without amplifier). It allows the connection of up to 5 receivers or splitting the main bus into 4 independent outputs. It is also possible to connect another splitter or to terminate the main bus.
The active outputs allow direct connection of receivers at a distance of max. The active outputs allow direct connection of receivers at a distance of max. 70 m (with appropriate system configuration).
The splitter is equipped with additional fuses on each output, which disconnect the output from the system, signaling this with an LED.
One of the active outputs is additionally amplified, which eliminates the loss of video signal on long buses.
Monitoring of supply voltage and line status is indicated by a “status LED”.
It has an additional screw output for connecting audio lines. Mounted on floors, at the collective point of the installation or at the bus splitting point. It can be powered from the main bus or from an external 15V power supply (built-in jumper to cut off the bus power), supplying the output devices. The splitter is resistant to cable damage.
Designed for DIN rail mounting (occupies a width of 4 DIN modules) and surface mounting.
It is compatible with ACO devices operating in PRO and PRO-A systems.

PRO-USB computer interface ver. 2.0 to manage settings of 3rd generation PRO devices via the door entry system bus. It is compatible with PRO 3 MANAGER computer software and COMO-PRO, GLASS-PRO, other devices marked “G3”. It also enables software update of all 3-generation PRO devices.

*Installed drivers are the property of STMicroelectronics.
More information is available at www.st.com

Universal active DIN rail mounted splitter. It has four active outputs (amplifiers) and one passive output (without amplifier). It allows the connection of up to 5 receivers or splitting the main bus into 4 independent outputs. It is also possible to connect another splitter or to terminate the main bus.

Control of home automation and external devices, additional signaling, auto-opening. For devices (G3) module supports more addresses.

Switch for 2 cameras for the PRO system mounted in a 60mm electrical box. G3: 3rd generation, including: programming settings and software updates via system bus (PRO-USB required).

Compatible with Familio / Como PRO

2 output camera switch, without housing, for fi60 electrical box.

* Compatible with Familio / Como PRO: can be assigned to an individual address: 1, 2 or 3 (max 3 buttons) or without being assigned to a specific address (responds to any button / address).

Universal active video splitter for Aco video door entry systems. Distributes the video signal to four active outputs (built-in amplifiers). It allows the connection of up to 4 receivers or splitting the main bus into 4 independent outputs. It is also possible to connect another splitter or to terminate the main bus (100Ω video terminator included in the set).Active outputs allow direct connection of receivers at distances up to 70m (with appropriate number of power supplies). With appropriate system configuration it is possible to achieve greater distances. Mounted on floors, at the assembly point of the installation or at the bus splitting point.It can be powered from the main bus or an external 15V power supply. The distributor is resistant to wiring faults: shorting the video line, shorting the video line with the power or audio line.

Designed for surface mounting or, on selected models of devices, directly into a frame or box.

Compatible with all digital devices from the groups: CDNP, Inspiro, Familio P/PV and COMO PRO.

Signalling module allowing for automatic door opening without having to lift the handset.

CDNP I Inspiro I Familio P / PV

Signalling module allowing for automatic door opening without having to lift the handset.

CDNP I Inspiro I Familio P / PV

The module is used to detect a line short circuit or damage to a home station.

It automatically disconnects it from the Main Line, thus preventing the entire system from being immobilized. The module has 5 separately controlled outputs.

CDNP I Inspiro I Familio P / PV

Interference filter for intercom systems, recommended when using power supplies that do not have a PE terminal (e.g. PS-HDR-60-15).

Control of home automation and external devices, additional signaling, auto-opening.

DC power supply, 15VDC, 3A, built-in 3-output video splitter, dedicated to the PRO, PRO-A systems, DIN rail mounted (6 modules), PE terminal.

Compatible with systems P and PV

Intermediate video combiner without camera