UPRO800

Hands-free audio receiver for PRO system, flat front with touchscreen function icons

ABS plastic housing

122,5×81,5×27

Surface-mounted

White

Headset-free

–

Digital PRO system: min. 3 wires or twisted pair cat. 5e or 6

15VDC / 140 mA

~0,6W

The ” Circle” button (function key F2):
– on the system bus (optional PRO I/O-60 module required)
– 2 x ARK screw terminals: NO contact: 2A/24VDC (potential-free, separated from the system) – after pressing the button for 3s

1 x RJ45 socket
5 x screw connectors (PRO system bus connection):
– audio signal connection: “LINE”
– power supply connection: “+DC” and “-DC”
1 x screw connector “RING”:
– connection of a NO contact, e.g. “bell” button – doorbell function (activated after shorting to GND of the system)

– intuitive and comfortable operation and simple installation
– hands-free
– illuminated touchscreen icons
– 7-grade sound adjustment (ringing and calling independently)
– 4 melodious ringtones
– Optical signalling of call muting
– Clear, distortion-free sound
– Full privacy of the call (no possibility to eavesdrop the conversation)
– Possibility of work of several receivers under one address
– the receiver can receive any calling address (after setting the address to “0”)
– home automation (function key F2): control of external devices such as gate, barrier, roller blinds, lighting, etc.
without establishing a connection (optional Relay Module PRO I/O-60 connected to the system bus is required)
– built-in universal relay outputs activated independently for 1s, e.g. for home automation (potential-free,
(potential-free, separated from the system, activated by a touch icon, from the computer it is possible to adjust time of operation and mode: mono or bistable)
– Door bell function (RING) – activated via the built-in input or via the system bus (optional module required)
PRO I/O-60 MODULE IS REQUIRED)
– Office function – automatic door opening – activation at any time (door will open when ringing is detected)
– Intercom function: possibility of making calls within a building between receivers (PC-based setting of intercom
(from the computer it is possible to set the intercom address to which the receiver should ring – by default it rings at all 3 addresses simultaneously)
– possibility of intercom ringing within the main ringing address as well as outside the main ringing address – communication back to other premises or e.g. doorman
– independent main address (0-1023) and intercom address (0-3) for each receiver
– supports calling addresses from the pool available in the system: 127 addresses (programmed by switches in the receiver) or from the 1023 addresses available in the system (programmed from the computer)
– compatible with devices working in PRO and PRO-A system (e.g. COMO-PRO panels)
– programming of settings and software update over the system bus (optional computer interface PRO-USB 2.0 required)
– individual number for each device: DevID
– Search for all devices in the system
– Individual or group device management
– possibility to manage devices and updates in a running system
– One software to manage all devices: PRO 3 MANAGER