PRO-I-SPLIT-DIN
Active video splitter for PRO system, DIN rail mounted
ABS plastic housing
91,1x71x59,2 (4 DIN modules)
DIN rail or surface mounted
Digital PRO system: twisted pair cat. 5e or 6
15VDC / 60 mA
~0,9W
RJ45 connector (5 x bus: video, line, power):
– 4 x active outputs (amplifiers) max. load up to 0.7A
– 1 x passive output (without amplifier)
ARK screw connectors:
– line signal connection (audio receivers)
RJ45 connector (bus: video, line, power):
– 1 x main input
ARK screw connectors:
– auxiliary power connection
– connection of up to 5 receivers
– distance to receiver: up to 70 m (with appropriate number of power supplies)
– possibility to increase the distance using additional power supplies
system
– division of the main bus into 4 independent outputs
– four active outputs (video amplifiers)
– one passive output to connect another splitter or receiver (without video amplifier)
video amplifier)
– one active output with additional video amplification “Long Dist.
Dist”: ca. 1.8x (with long buses it compensates loss of video signal)
– Possibility of working as loop-through or video splitter (built-in video terminator
jumper-controlled video terminator)
– powered from the bus or from an additional power supply (distributing power to
individual outputs)
– screw terminals for connecting the power supply and built-in cut-off jumper
power supply from the bus
– screw terminals for connecting audio lines
– fault-tolerant video signals
– monitoring of input and output status: power supply voltage and audio line voltage
(detection of too high and too low supply voltage, output overload,
audio line short circuit, etc.)
– individual LEDs indicating the status of each output and input
– flashing codes informing about 6 different statuses (errors) of each output and
input
– automatic disconnection of the active output from the main bus when it is
automatically disconnects the active output from the main bus when there is a power short circuit (overload) and/or short-circuit of the audio line
– enable normal operation of the entire door entry system in the event of
short circuits in the premises
– automatic restoration of normal operation after a short circuit has occurred
– enables the diagnosis of problems occurring in the door entry system
– compatible with PRO systems, both Audio and Video
