MPRO800 3,5 Loudspeaker video receiver with flat front panel and 3.5 inch colour display with touch sensitive icons, for the PRO system


MPRO800 3,5 Loudspeaker video receiver with flat front panel and 3.5 inch colour display with touch sensitive icons, for the PRO system

The video receiver features small in size design as well as simple and intuitive operation and installation. Receiver with a flat front panel with a 3.5″ colour display as well as touch sensitive and backlit function icons. UPRO800 3.5 is a loudspeaker receiver with very good sound quality. Its major functions include: internal communication (between receivers in the same building), musical ringtones, door opening or second gate opening without having to make a call, auto-opening door function, door bell function, optical signalling of bell and ringing mute, 7-stage volume control (both ring and call), built-in universal relay output switched using the touch icon (can be used for controlling home automation etc.).

This is a PRO 3 family receiver, which means improved design of the device for even greater reliability and capabilities, including: support of larger (longer) installations, greater number of subscribers, remote management of the device (from any point in the system) and software updates. PRO 3rd generation products are continuously developed and with software updates all new functionalities and possibilities will also be available for those who already purchased products before.

The unit is compatible with ACO devices operating in PRO and PRO-A systems.


MPRO800 3,5


Loudspeaker video receiver for the PRO system, a flat front panel with a 3.5″ colour display as well as touch sensitive function icons


ABS plastic housing

Dimensions (mm)

198 x 81,5 x 27



Available colours


Handset hang-up


3.5″ colour LCD

Installation type

Digital PRO system: twisted pair cat. 5e or 6

Power supply

15VDC / 300 mA

Standby power consumption



“Wheel” button (function key F2):
– via the system bus (optional PRO I/O-60 module required)
– 2 x ARK screw terminals: NO contact: 2A/24VDC (potential-free, separated from the system) – upon pressing the button for 3s


1 x RJ45 socket (PRO system bus connection)
5 x screw terminals (PRO system bus connection):
– audio signal connection: “LINE”
– power supply connection: “+DC” and “-DC”
– video signal connection: “V+” and “V-”
1 x “RING” screw connector:
– NO contact connection e.g. “bell” button – door bell function (activated upon shorting to GND of the system)


– intuitive and comfortable operation plus simple installation
– loudspeaker
– backlit, touch sensitive icons
– 7-stage volume control (both ring and call independently)
– 4 musical ringtones
– optical signalling of call mute
– clear, distortion-free sound
– full privacy of the call (no eavesdropping possible)
– optional combining of several receivers at one address
– monitor can receive any call address (when setting the address to “0”)
– colourful, clear image
– optional call up of an image preview in standby mode and switching on permanent preview
– home automation (function key F2): control of external devices, such as gate, barrier, roller shutters, lighting also without having to make a call (optional relay module PRO I/O-60 connected to the system bus is required)
– built-in universal relay outputs activated independently for 1s, which ca be used for home automation (potential-free, separated from the system, activated via a touch icon, via a PC, operation time control and mode control: mono or bistable)
– door bell function (RING) – activated via built-in input or via system bus (optional PRO I/O-60 module required)
– office function – automatic door opening – activation at any time (door will open upon detection of ringing)
– internal communication function: communication within a building between receivers (by setting intercom address which a receiver should call via a PC – by default it calls all 3 addresses simultaneously)
– intercom ringing within the main ringing address and outside the main ringing address – return communication with other locations or with a doorman, etc.
– independent master address (0-1023) and intercom address (0-3) for each receiver
– supports calling address from the pool available in the system: 127 addresses (programmed with switches in the receiver) or from 1023 addresses available in the system (programmed via a PC)
– option of connecting up to 4 additional cameras (requires optional PRO-VIDEO-SW2-60 (G3) module connected to the system bus)
– compatible with devices in PRO and PRO-A system (such as COMO-PRO panels)
– programming settings and software updates via the system bus (PRO-USB computer interface required)
– individual number for each device: DevID
– search for all devices in the system
– individual or group device management
– handling devices and updates in a running system
– one software to operate all devices: PRO 3 MANAGER (free software available at