« Back to the main page
| MPRO800 3,5" | Loudspeaker video receiver with flat front panel and 3.5 inch colour display with touch sensitive icons, for the PRO system
Where to buy?

Technical details

Index MPRO800 3,5
Description Loudspeaker video receiver for the PRO system, a flat front panel with a 3.5" colour display as well as touch sensitive function icons
Material of front ABS plastic housing
Available colours White
Handset hang-up -
Display 3.5" colour LCD
Mounting Surface-mounted
Dimensions (mm) 198 x 81,5 x 27
Installation type Digital PRO system: twisted pair cat. 5e or 6
Power supply 15VDC / 300 mA
Power consumption in stnad-by ~0,6W
Input 1 x RJ45 socket (PRO system bus connection)
5 x screw terminals (PRO system bus connection):
- audio signal connection: “LINE”
- power supply connection: "+DC" and "-DC"
- video signal connection: "V+" and "V-"
1 x "RING" screw connector:
- NO contact connection e.g. "bell" button - door bell function (activated upon shorting to GND of the system)
Output "Wheel" button (function key F2):
- via the system bus (optional PRO I/O-60 module required)
- 2 x ARK screw terminals: NO contact: 2A/24VDC (potential-free, separated from the system) - upon pressing the button for 3s
Characteristics - intuitive and comfortable operation plus simple installation
- loudspeaker
- backlit, touch sensitive icons
- 7-stage volume control (both ring and call independently)
- 4 musical ringtones
- optical signalling of call mute
- clear, distortion-free sound
- full privacy of the call (no eavesdropping possible)
- optional combining of several receivers at one address
- monitor can receive any call address (when setting the address to "0")
- colourful, clear image
- optional call up of an image preview in standby mode and switching on permanent preview
- home automation (function key F2): control of external devices, such as gate, barrier, roller shutters, lighting also without having to make a
call (optional relay module PRO I/O-60 connected to the system bus is required)
- built-in universal relay outputs activated independently for 1s, which ca be used for home automation (potential-free, separated from the
system, activated via a touch icon, via a PC, operation time control and mode control: mono or bistable)
- door bell function (RING) - activated via built-in input or via system bus (optional PRO I/O-60 module required)
- office function - automatic door opening - activation at any time (door will open upon detection of ringing)
- internal communication function: communication within a building between receivers (by setting intercom address which a receiver should call
via a PC - by default it calls all 3 addresses simultaneously)
- intercom ringing within the main ringing address and outside the main ringing address - return communication with other locations or with a
doorman, etc.
- independent master address (0-1023) and intercom address (0-3) for each receiver
- supports calling address from the pool available in the system: 127 addresses (programmed with switches in the receiver) or from 1023
addresses available in the system (programmed via a PC)
- option of connecting up to 4 additional cameras (requires optional PRO-VIDEO-SW2-60 (G3) module connected to the system bus)
- compatible with devices in PRO and PRO-A system (such as COMO-PRO panels)
- programming settings and software updates via the system bus (PRO-USB computer interface required)
- individual number for each device: DevID
- search for all devices in the system
- individual or group device management
- handling devices and updates in a running system
- one software to operate all devices: PRO 3 MANAGER (free software available at www.support.aco.com.pl)

Examples of dedicated devices

Downloads