« Back to the main page
  • | CDNVRau-DIN  | Active video splitter for DIN rail

    | CDNVRau-DIN | Active video splitter for DIN rail

    Active splitter for DIN rail. It has 4 active outputs (amplifiers) and one passive output (no amplifier). It allows connection of up to 5 inside units or splitting the bus line into 4 independent outputs. It is also possible to connect another splitter or to terminate the line with the main jumper.
    Active outputs make possible connecting the inside units within 70 m distance (when the configuration is done properly).
    One of the active outputs is additionally strengthened which allows to level down video signal losses on long bus lines.
    The audio line can be connected with additional screw terminals.
    The module can be mounted on the floors, in central points or where the bus line is split.
    It can be powered up from the bus line or from an external 15V PSU (integrated jumper that cuts off power from the bus line).
    The splitter is resistant to the cabling damages (short circuit of the power line with audio or video line)
    It takes space of 4 DIN modules.
    Compatible with chosen digital devices from: CDN, Inspiro and Familio groups.

  • | CDNVRau | Active video splitter

    | CDNVRau | Active video splitter

    Universal active video splitter for Aco video door entry systems. Distributes the video signal to four active outputs (built-in amplifiers). It allows the connection of up to 4 receivers or splitting the main bus into 4 independent outputs. It is also possible to connect another splitter or to terminate the main bus (100Ω video terminator included in the set).Active outputs allow direct connection of receivers at distances up to 70m (with appropriate number of power supplies). With appropriate system configuration it is possible to achieve greater distances. Mounted on floors, at the assembly point of the installation or at the bus splitting point.It can be powered from the main bus or an external 15V power supply. The distributor is resistant to wiring faults: shorting the video line, shorting the video line with the power or audio line.

    Designed for surface mounting or, on selected models of devices, directly into a frame or box.

    Compatible with all digital devices from the groups: CDNP, Inspiro, Familio P/PV and COMO PRO.

  • | CDNVRau4-60 | Universal 4-output active splitter - for Ø60 mm electrical box

    | CDNVRau4-60 | Universal 4-output active splitter - for Ø60 mm electrical box

    Universal distributor with active video amplifiers for digital systems. It enables connection of four receivers or separation of the main bus into four independent outputs. It is also possible to connect another distributor or terminate the bus. The maximum distance between the receiver and the distributor is 70m.
    Mounted on floors, at the installation's assembly point or at the bus distribution point.
    Module without housing for installation in a Ø60 mm electrical box.
    Compatible with digital devices from groups: CDNP, Inspiro, Familio P/PV and COMO PRO/PRO-A.

  • | CDNVS | Video combiner

    | CDNVS | Video combiner

    The combiner starts the bus of a digital video system. It connects the power supply to the panel and provides power to the bus. In selected models of devices it is possible to mount directly in a frame or box. 

    Compatible with digital master panels with a group camera module: CDN, Inspiro and Familio P with an external camera.

  • | CDNVSp | Video intermediate combiner

    | CDNVSp | Video intermediate combiner

    The intermediate combiner expands the bus of a digital video system. It allows to connect the power supply to the panel and provides power to the bus. In selected models of devices it is possible to mount directly in a frame or box. It is possible to distance the module from the panel by using an ARK-RS adapter. Due to data transmission, the maximum cable length depends on external interference. Compatible with digital slave panels with a group camera module: CDN, Inspiro and Familio P with an external camera.

  • | CDNVSbk | Video intermediate combiner no without camera

    | CDNVSbk | Video intermediate combiner no without camera

    The intermediate combiner expands the existing digital video system bus. The intermediate combiner (no camera) is used for audio control panels where the video signal has to pass on to the bus. In selected models of devices, it is possible to mount directly in a frame or box. It is possible to distance the module from the panel by using an ARK-RS adapter. Due to data transmission, the maximum cable length depends on external interference. Compatible with digital slave panels without group camera module: CDN, Inspiro and Familio P.

  • | CDNVS-60 |  Video combiner - to an installation box Ø60 mm

    | CDNVS-60 | Video combiner - to an installation box Ø60 mm

    Video combiner for digital systems. Used when there is a need to connect an external analog camera or other video source to systems without a camera. The module converts the PAL signal into a differential video signal (transmitted via a cat. 5e or 6 twisted pair cable). It can also be used to connect a second camera: in INS-MP7 monitors or to the camera switch module (VIDEO-SW2 MINI-60).
    Module without housing for mounting in a Ø60 mm installation box.
    Compatible with digital group devices: CDNP, Inspiro and Familio.

  • Active straight-through splitter with 2 outputs | CDNVRA2 |

    Active straight-through splitter with 2 outputs | CDNVRA2 |

    Product discontinued, available while supplies last.
    Replaced with splitter: CDNVRau-DIN

    Active ending distributor module enabling to divide video signal to given apartaments.

    It's a cluster ending the line connected to main in-put.

    Use when the distance is more than 7m between the distributor and the monitor in given apartament.

  • Active straight-through splitter with 4 outputs | CDNVRA4 |

    Active straight-through splitter with 4 outputs | CDNVRA4 |

    Product discontinued, available while supplies last.
    Replaced with splitter: CDNVRau-DIN

    Active ending distributor module enabling to divide video signal to given apartaments.

    Use when the distance is more than 7m between the distributor and the monitor in given apartament.

  • Active terminal splitter with 4 outputs | CDNVRAK4 |

    Active terminal splitter with 4 outputs | CDNVRAK4 |

    Product discontinued, available while supplies last.
    Replaced with splitter: CDNVRau-DIN

    Active ending distributor module enabling to divide video signal to given apartaments.

    It's a cluster ending the line connected to main in-put.

    Use when the distance is more than 7m between the distributor and the monitor in given apartament.

  • Active terminal splitter with 2 outputs | CDNVRAK2 |

    Active terminal splitter with 2 outputs | CDNVRAK2 |

    Product discontinued, available while supplies last.
    Replaced with splitter: CDNVRau-DIN

    Active ending distributor module enabling to divide video signal to given apartaments.

    It's a cluster ending the line connected to main in-put.

    Use when the distance is more than 7m between the distributor and the monitor in given apartament.