« Back to the main page
  • | FAM-PV-1NPACC | Video door entry panel with key fob reader and 1 button

    | FAM-PV-1NPACC | Video door entry panel with key fob reader and 1 button

    Video door entry panel is equipped with colour and heated camera with adjustable observation direction and LED light,  a reader of proximity key fobs, access control and 1 backlit button and description field.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-PV-2NPACC | Video door entry panel with key fob reader and 2 buttons

    | FAM-PV-2NPACC | Video door entry panel with key fob reader and 2 buttons

    Video door entry panel is equipped with colour and heated camera with adjustable observation direction and LED light, a reader of proximity key fobs, access control and 2 backlit buttons and description fields.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-PV-4NPACC | Video door entry panel with key fob reader and 4 buttons

    | FAM-PV-4NPACC | Video door entry panel with key fob reader and 4 buttons

    Video door entry panel is equipped with colour and heated camera with adjustable observation direction and LED light, a reader of proximity key fobs, access control and 4 backlit buttons and description fields.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-PV-6NPACC | Video door entry panel with key fob reader and 6 buttons

    | FAM-PV-6NPACC | Video door entry panel with key fob reader and 6 buttons

    Video door entry panel is equipped with colour and heated camera with adjustable observation direction and LED light, a reader of proximity key fobs, access control and 6 backlit buttons and description fields.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  •  | FAM-PV-1NPZSACC | Video door entry panel key fob reader, code lock and 1 button

    | FAM-PV-1NPZSACC | Video door entry panel key fob reader, code lock and 1 button

    Video door entry panel is equipped with colour and heated camera with adjustable observation direction and LED light,  a reader of proximity key fobs, access control code lock and 1 backlit button and description field.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-PV-2NPZSACC | Video door entry panel key fob reader, code lock and 2 buttons

    | FAM-PV-2NPZSACC | Video door entry panel key fob reader, code lock and 2 buttons

    Video door entry panel is equipped with colour and heated camera with adjustable observation direction and LED light,  a reader of proximity key fobs, access control code lock and 2 backlit buttons and description fields.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-PV-ZSACC | Video door entry panel key fob reader and code lock

    | FAM-PV-ZSACC | Video door entry panel key fob reader and code lock

    Video door entry panel is equipped with colour and heated camera with adjustable observation direction and LED light,  a reader of proximity key fobs, access control, code lock and description field.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-P-1NPACC | Digital door entry panel with key fob reader and 1 button

    | FAM-P-1NPACC | Digital door entry panel with key fob reader and 1 button

    The panel is equipped with a reader of proximity key fobs, 1 backlit button and description field.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  •  | FAM-P-2NPACC | Digital door entry panel with key fob reader and 2 buttons

    | FAM-P-2NPACC | Digital door entry panel with key fob reader and 2 buttons

    The panel is equipped with a reader of proximity key fobs, 2 backlit buttons and description fields.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-P-4NPACC | Digital door entry panel with key fob reader and 4 buttons

    | FAM-P-4NPACC | Digital door entry panel with key fob reader and 4 buttons

    The panel is equipped with a reader of proximity key fobs, 4 backlit buttons and description fields.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  •  | FAM-P-6NPACC | Digital door entry panel with key fob reader and 6 buttons

    | FAM-P-6NPACC | Digital door entry panel with key fob reader and 6 buttons

    The panel is equipped with a reader of proximity key fobs, 6 backlit buttons and description fields.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-P-1NPZSACC |  Digital door entry panel with key fob reader, code lock and 1 button

    | FAM-P-1NPZSACC | Digital door entry panel with key fob reader, code lock and 1 button

    The panel is equipped with a reader of proximity key fobs, access control code lock and 1 backlit button and description field.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-P-2NPZSACC | Digital door entry panel with key fob reader, code lock and 2 buttons

    | FAM-P-2NPZSACC | Digital door entry panel with key fob reader, code lock and 2 buttons

    The panel is equipped with a reader of proximity key fobs, access control code lock and 2 backlit buttons and description fields.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-P-ZSACC | Digital door entry panel with key fob reader and code lock

    | FAM-P-ZSACC | Digital door entry panel with key fob reader and code lock

    The panel is equipped with a reader of proximity key fobs, access control code lock and backlit description field.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-P-1NPACC NT | Digital door entry panel with key fob reader and 1 button

    | FAM-P-1NPACC NT | Digital door entry panel with key fob reader and 1 button

    The panel is equipped with a reader of proximity key fobs, 1 backlit button and description field.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-P-2NPACC NT | Digital door entry panel with key fob reader and 2 buttons

    | FAM-P-2NPACC NT | Digital door entry panel with key fob reader and 2 buttons

    The panel is equipped with a reader of proximity key fobs, 2 backlit button and description fields.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-P-4NPACC NT | Digital door entry panel with key fob reader and 4 buttons

    | FAM-P-4NPACC NT | Digital door entry panel with key fob reader and 4 buttons

    The panel is equipped with a reader of proximity key fobs, 4 backlit button and description fields.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-P-6NPACC NT | Digital door entry panel with key fob reader and 6 buttons

    | FAM-P-6NPACC NT | Digital door entry panel with key fob reader and 6 buttons

    The panel is equipped with a reader of proximity key fobs, 6 backlit buttons and description fields.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-P-1NPZSACC NT| Digital door entry panel with key fob reader, code lock and 1 button

    | FAM-P-1NPZSACC NT| Digital door entry panel with key fob reader, code lock and 1 button

    The panel is equipped with a reader of proximity key fobs, access control code lock and 1 backlit button and description field.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-P-2NPZSACC NT | Digital door entry panel with key fob reader, code lock and 2 buttons

    | FAM-P-2NPZSACC NT | Digital door entry panel with key fob reader, code lock and 2 buttons

    The panel is equipped with a reader of proximity key fobs, access control code lock and 2 backlit buttons and description fields.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | FAM-P-ZSACC NT | Digital door entry panel with key fob reader and code lock

    | FAM-P-ZSACC NT | Digital door entry panel with key fob reader and code lock

    The panel is equipped with a reader of proximity key fobs, access control code lock and backlit description field.

    The FAMILIO range is designed for single houses and also for buildings with few apartments.
    The combination of modern technology with brushed stainless steel creates timless solutions for individual clients that value design and functionality.

  • | acoGO! 2.0 P WiFi | IP gateway for P or PV door entry system with built-in WiFi (iOS / Android / Audio / Video / Single / Multi)

    | acoGO! 2.0 P WiFi | IP gateway for P or PV door entry system with built-in WiFi (iOS / Android / Audio / Video / Single / Multi)

    The acoGO! 2.0 allows you to answer an incoming door entry system call on your smartphone using the acoGO! 2.0 mobile application available both for Apple smartphones with iOS software and any smartphones with Android system. The gateway allows you to remotely answer a call, open a door, and control a second gate or other home automation.

    AcoGO! 2.0 is a multifunction device and can be used both in a single-family house as well as in a multi-apartment building. In case of multi-apartment buildings, it is enough to install one device in the building and each resident can connect to the gateway and use the "My acoGO! Multi". The device is factory set in audio and single version - it supports 1 apartment (1 receiver address) and audio conversation with the possibility of adding two smartphones. By purchasing and activating appropriate licenses on portal.acogo.pl you can for example add the video function, which allows you to view the image from the camera of the door entry system caller. It is also possible to buy Multi license, which is dedicated to multi-apartment investments and allows the device to support up to 64 apartments, and in each of them it is possible to add up to 4 smartphones. The portal also allows you to manage all acoGO! devices from anywhere, at any time, using a regular web browser, such as adding or removing users.

    The portal also allows you to pay for subscription services which allow you, for example, to connect up to 4 smartphones for the Single version or to use "My acoGO! Multi" service. Subscriptions can be easily paid for for 1, 3 or 12 months and can be extended or cancelled at any time without any obligations and without having to sign any contracts or subscriptions. More details about acoGO! 2.0 can be found atwww.acogo.pl 

    Minimalist form allows for versatile use of the device in various types of investments. It is designed mainly for mounting on a wall or in a switchboard. In order to work, the device requires a permanent connection to the Internet, which can be provided via WiFi wireless network or wired LAN (recommended solution). AcoGO! can be mounted instead of a classic audio or video intercom receiver, and also enables sending video signal from the door entry camera as an RTSP stream that can be captured by e.g. a video recorder.

    It cooperates with ACO devices operating in Pand PV systems (Familio, Inspiro, CDNP).

  • | acoGO! P-IP WiFi | SIP gateway for door entry system P or PV, with call redirection to any phone (audio version)

    | acoGO! P-IP WiFi | SIP gateway for door entry system P or PV, with call redirection to any phone (audio version)

    The gateway acoGO! 1.0 (SIP) allows you to answer the intercom call on any phone as a normal phone call. It allows you to remotely handle the call, open the door and control the second gate or other home automation (from the phone's numeric keypad).

    In order to work, an external SIP server is required, which allows you to redirect calls from the door entry system to ordinary phone numbers (mobile, stationary, internal), regardless of the type of phone you have. It is possible to use an existing SIP server in the building (e.g. telephone exchange) or use an external VoIP service provider, who will provide access to a SIP server and enable calling to ordinary phone numbers. The SIP server and VoIP services are independent of the acoGO! gateway and must be arranged on your own (example VoIPprovider is www.fcn.pl).

    The device supports 1 apartment (1 receiver address) and audio call with the possibility of adding four phone numbers to which the call is to be made. Calling is done sequentially to individual phone numbers (depending on the set time).

    The device requires LAN connection with access to SIP server (locally or remotely e.g. via Internet). The connection to the LAN is possible using the built-in WiFi or wired - Ethernet socket (recommended solution). The gateway can be installed instead of a classic door entry receiver or simultaneously with an existing receiver (by connecting it to the door entry bus). Connection is established with the telephone or door entry receiver, depending on which one answers the call first. The gateway works with Aco devices operating in P or PV systems (Familio, Inspiro, CDNP). Minimalist form allows for versatile use of the device in various types of investments. It is mainly designed for mounting on a wall or in a switchboard.

    NOTE: An alternative device that does not require a SIP server is acoGO! 2.0 P WiFi gateway, which allows you to receive the intercom on a dedicated application installed on your smartphone (Android / iPhone - iOS), with the ability to preview the video door entry and options for multi-apartment buildings - more details can be found on www.fcn.pl www.acogo.pl

  • | MP800 3,5” | Handsfree video inside unit

    | MP800 3,5” | Handsfree video inside unit

     

    Digital video inside unit with 3,5” LCD display, flat front with touch functional icons

    Attention! A newer generation of the device with new functionalities is now available: MP800 (G2)

    ACO receivers are solid devices, made of the best quality materials, functional and simple to use

    Reliability, durability and innoviation are trademarks of ACO brand.

  • | UP800 | Digital handsfree audio inside unit

    | UP800 | Digital handsfree audio inside unit

    Digital audio handsfree inside unit with flat front and touch function icons

    Attention! A newer generation of the device with new functionalities is now available: UP800 (G2)

    ACO receivers are solid devices, made of the best quality materials, functional and simple to use.

    Reliability, durability and innoviation are trademarks of ACO brand.

  • | UP800V | Digital audio inside unit upgradeable with LCD display

    | UP800V | Digital audio inside unit upgradeable with LCD display

    Digital audio inside unit upgradeable with LCD display, flat front with touch functional icons

    Attention! A newer generation of the device with new functionalities is now available: UP800V (G2)

    ACO receivers are solid devices, made of the best quality materials, functional and simple to use.

    Reliability, durability and innoviation are trademarks of ACO brand.

  • | UP800 LCD 3,5” | Display module LCD 3,5''

    | UP800 LCD 3,5” | Display module LCD 3,5''

    Colour display module LCD 3,5” - allows easy conversion of audio unit (UP800V) to video (MP800)

    ACO receivers are solid devices, made of the best quality materials, functional and simple to use.

    Reliability, durability and innoviation are trademarks of ACO brand.

  • | INS-MP7 BK | Handsfree digital inside unit with glass front and 7” colour display

    | INS-MP7 BK | Handsfree digital inside unit with glass front and 7” colour display

    Handsfree digital inside unit with glass front, 7” colour display and functional touch icons

    ACO receivers are solid devices, made of the best quality materials, functional and simple to use.

    Reliability, durability and innovation are trademarks of ACO brand.

  • | INS-MP7 WH | Handsfree digital inside unit with glass front and 7” colour display

    | INS-MP7 WH | Handsfree digital inside unit with glass front and 7” colour display

    Handsfree digital inside unit with glass front, 7” colour display and functional touch icons

    ACO receivers are solid devices, made of the best quality materials, functional and simple to use.

    Reliability, durability and innovation are trademarks of ACO brand.

  • | INS-MPR 4" | Digital video inside unit with colour 4” display, magnetic handset hang-up and door bell function

    | INS-MPR 4" | Digital video inside unit with colour 4” display, magnetic handset hang-up and door bell function

    Video inside unit with handset and 4” colour display, magnetic handset hang-up and door bell function.

    ACO receivers are solid devices, made of the best quality materials, functional and simple to use.

    Reliability, durability and innovation are trademarks of ACO brand.

  • | INS-MPR 3,5" | Digital video inside unit with colour 3,5” display, magnetic handset hang-up and door bell function

    | INS-MPR 3,5" | Digital video inside unit with colour 3,5” display, magnetic handset hang-up and door bell function

    Video inside unit with handset and 3,5” colour display, magnetic handset hang-up and door bell function.

    ACO receivers are solid devices, made of the best quality materials, functional and simple to use.

    Reliability, durability and innovation are trademarks of ACO brand.

  • | INS-UP720MR | Digital audio inside unit with magnetic handset hang-up and door bell function

    | INS-UP720MR | Digital audio inside unit with magnetic handset hang-up and door bell function

    Digital audio inside unit with magnetic handset hang-up, 2 buttons and door bell function

    ACO receivers are solid devices, made of the best quality materials, functional and simple to use.

    Reliability, durability and innovation are trademarks of ACO brand.

  • | INS-UP720M | Digital audio inside unit with magnetic handset hang-up

    | INS-UP720M | Digital audio inside unit with magnetic handset hang-up

    Digital audio inside unit with magnetic handset hang-up and 2 buttons

    ACO receivers are solid devices, made of the best quality materials, functional and simple to use.

    Reliability, durability and innovation are trademarks of ACO brand.

  •  | INS-UP720BX | Digital audio inside unit with magnetic handset hang-up

    | INS-UP720BX | Digital audio inside unit with magnetic handset hang-up

    Digital audio inside unit with magnetic handset hang-up and 1 button

    ACO receivers are solid devices, made of the best quality materials, functional and simple to use.

    Reliability, durability and innovation are trademarks of ACO brand.

  • | INS-UP720B | Audio inside unit with traditional handset hang-up

    | INS-UP720B | Audio inside unit with traditional handset hang-up

    Audio inside unit with traditional handset hang-up and 1 button

    ACO receivers are solid devices, made of the best quality materials, functional and simple to use.

    Reliability, durability and innovation are trademarks of ACO brand.

  • | INS-UP | Digital audio inside unit with magnetic handset      hang-up

    | INS-UP | Digital audio inside unit with magnetic handset hang-up

    Digital audio inside unit with magnetic handset hang-up and 2 buttons

    ACO receivers are solid devices, made of the best quality materials, functional and simple to use.

    Reliability, durability and innovation are trademarks of ACO brand.

  • | CDNVRau-DIN  | Active video splitter for DIN rail

    | CDNVRau-DIN | Active video splitter for DIN rail

    Active splitter for DIN rail. It has 4 active outputs (amplifiers) and one passive output (no amplifier). It allows connection of up to 5 inside units or splitting the bus line into 4 independent outputs. It is also possible to connect another splitter or to terminate the line with the main jumper.
    Active outputs make possible connecting the inside units within 70 m distance (when the configuration is done properly).
    One of the active outputs is additionally strengthened which allows to level down video signal losses on long bus lines.
    The audio line can be connected with additional screw terminals.
    The module can be mounted on the floors, in central points or where the bus line is split.
    It can be powered up from the bus line or from an external 15V PSU (integrated jumper that cuts off power from the bus line).
    The splitter is resistant to the cabling damages (short circuit of the power line with audio or video line)
    It takes space of 4 DIN modules.
    Compatible with chosen digital devices from: CDN, Inspiro and Familio groups.

  • | CDNVRau | Active video splitter

    | CDNVRau | Active video splitter

    Universal active video splitter for Aco video door entry systems. Distributes the video signal to four active outputs (built-in amplifiers). It allows the connection of up to 4 receivers or splitting the main bus into 4 independent outputs. It is also possible to connect another splitter or to terminate the main bus (100Ω video terminator included in the set).Active outputs allow direct connection of receivers at distances up to 70m (with appropriate number of power supplies). With appropriate system configuration it is possible to achieve greater distances. Mounted on floors, at the assembly point of the installation or at the bus splitting point.It can be powered from the main bus or an external 15V power supply. The distributor is resistant to wiring faults: shorting the video line, shorting the video line with the power or audio line.

    Designed for surface mounting or, on selected models of devices, directly into a frame or box.

    Compatible with all digital devices from the groups: CDNP, Inspiro, Familio P/PV and COMO PRO.

  • | CDNVRau4-60 | Universal 4-output active splitter - for Ø60 mm electrical box

    | CDNVRau4-60 | Universal 4-output active splitter - for Ø60 mm electrical box

    Universal distributor with active video amplifiers for digital systems. It enables connection of four receivers or separation of the main bus into four independent outputs. It is also possible to connect another distributor or terminate the bus. The maximum distance between the receiver and the distributor is 70m.
    Mounted on floors, at the installation's assembly point or at the bus distribution point.
    Module without housing for installation in a Ø60 mm electrical box.
    Compatible with digital devices from groups: CDNP, Inspiro, Familio P/PV and COMO PRO/PRO-A.

  • | CDNVS | Video combiner

    | CDNVS | Video combiner

    The combiner starts the bus of a digital video system. It connects the power supply to the panel and provides power to the bus. In selected models of devices it is possible to mount directly in a frame or box. 

    Compatible with digital master panels with a group camera module: CDN, Inspiro and Familio P with an external camera.

  • | FAM-PV-SP | Video intermediate combiner (only for Familio PV)

    | FAM-PV-SP | Video intermediate combiner (only for Familio PV)

    The intermediate combiner expands the bus of a digital video system. It is used to connect the next Familio PV panel to the system and enables the power supply to the bus. In selected models of devices it is possible to mount directly in a frame or box.
    Compatible with digital devices from the Familio PV group.

  • | CDNVSp | Video intermediate combiner

    | CDNVSp | Video intermediate combiner

    The intermediate combiner expands the bus of a digital video system. It allows to connect the power supply to the panel and provides power to the bus. In selected models of devices it is possible to mount directly in a frame or box. It is possible to distance the module from the panel by using an ARK-RS adapter. Due to data transmission, the maximum cable length depends on external interference. Compatible with digital slave panels with a group camera module: CDN, Inspiro and Familio P with an external camera.

  • | CDNVSbk | Video intermediate combiner no without camera

    | CDNVSbk | Video intermediate combiner no without camera

    The intermediate combiner expands the existing digital video system bus. The intermediate combiner (no camera) is used for audio control panels where the video signal has to pass on to the bus. In selected models of devices, it is possible to mount directly in a frame or box. It is possible to distance the module from the panel by using an ARK-RS adapter. Due to data transmission, the maximum cable length depends on external interference. Compatible with digital slave panels without group camera module: CDN, Inspiro and Familio P.

  • | CDNVS-60 |  Video combiner - to an installation box Ø60 mm

    | CDNVS-60 | Video combiner - to an installation box Ø60 mm

    Video combiner for digital systems. Used when there is a need to connect an external analog camera or other video source to systems without a camera. The module converts the PAL signal into a differential video signal (transmitted via a cat. 5e or 6 twisted pair cable). It can also be used to connect a second camera: in INS-MP7 monitors or to the camera switch module (VIDEO-SW2 MINI-60).
    Module without housing for mounting in a Ø60 mm installation box.
    Compatible with digital group devices: CDNP, Inspiro and Familio.

  • Active straight-through splitter with 2 outputs | CDNVRA2 |

    Active straight-through splitter with 2 outputs | CDNVRA2 |

    Product discontinued, available while supplies last.
    Replaced with splitter: CDNVRau-DIN

    Active ending distributor module enabling to divide video signal to given apartaments.

    It's a cluster ending the line connected to main in-put.

    Use when the distance is more than 7m between the distributor and the monitor in given apartament.

  • Active straight-through splitter with 4 outputs | CDNVRA4 |

    Active straight-through splitter with 4 outputs | CDNVRA4 |

    Product discontinued, available while supplies last.
    Replaced with splitter: CDNVRau-DIN

    Active ending distributor module enabling to divide video signal to given apartaments.

    Use when the distance is more than 7m between the distributor and the monitor in given apartament.

  • Active terminal splitter with 2 outputs | CDNVRAK2 |

    Active terminal splitter with 2 outputs | CDNVRAK2 |

    Product discontinued, available while supplies last.
    Replaced with splitter: CDNVRau-DIN

    Active ending distributor module enabling to divide video signal to given apartaments.

    It's a cluster ending the line connected to main in-put.

    Use when the distance is more than 7m between the distributor and the monitor in given apartament.

  • Active terminal splitter with 4 outputs | CDNVRAK4 |

    Active terminal splitter with 4 outputs | CDNVRAK4 |

    Product discontinued, available while supplies last.
    Replaced with splitter: CDNVRau-DIN

    Active ending distributor module enabling to divide video signal to given apartaments.

    It's a cluster ending the line connected to main in-put.

    Use when the distance is more than 7m between the distributor and the monitor in given apartament.

  • | CDNARu-DIN  | DIN rail audio splitter

    | CDNARu-DIN | DIN rail audio splitter

    DIN rail splitter for digital systems. It has 4 outputs that deliver audio signal and power and 1 straight through output that passes also video signal. It allows connection of up to 5 inside units or splitting the bus line line into 4 independent outputs and connecting additional splitter or termination of the bus line with jumper. Maximal distance of the inside unit from the splitter is 70m.
    The module can be mounted on the floors, in central points or where the bus line is split.
    It can be powered up from the bus line or from an external 15V PSU (integrated jumper that cuts off power from the bus line).
    The splitter is resistant to the cabling damages (short circuit of the power line with audio or video line)
    It takes space of 4 DIN modules.
    Compatible with chosen digital devices from: CDN, Inspiro and Familio groups.

     

  • | I/O MINI | Relay module to control home automation and external devices

    | I/O MINI | Relay module to control home automation and external devices

    The module enables the operation of external devices and control of home automation, e.g. garage door, barrier, lighting, roller shutters. It is mounted directly in the panel housing (applies to surface and flush mounted panels versions). It has functions analogous to port 2 output of CDN-I/O module.

    Compatible with digital panels from Familio P/PV groups.

  • | CDN-I/O | Input-output module to control external devices, e.g. second gateway or other home automation

    | CDN-I/O | Input-output module to control external devices, e.g. second gateway or other home automation

    The module allows you to connect additional devices to the panel and control them. It allows, among others, to connect a garage door, barrier, lighting, roller shutters or other automation. It extends the functionality of the panel by two NO inputs to connect an external buttons and two NO/NC relay outputs to control any devices. Each input and output can be independently programmed: type of function, relay activation time.

    In selected models of devices it is possible to mount directly in a frame or box.

    Compatible with digital group control panels: CDN, Inspiro and Familio P/PV.

  • | CDN-PK | Relay module

    | CDN-PK | Relay module

    Universal relay module with easy connection via screw terminals. It enables, among other things, the connection of a traditional electric door strike, electromagnetic lock, door controller, reversing door strike or any other device. It has a built-in capacitor, which allows the module to work with ACO devices that have an output to connect only the electric door strike.

    In selected models of devices it is possible to mount directly in a frame or box.

    Compatible with digital group control panels: CDNP, Inspiro, Familio P/PV and COMO PRO/PRO-A.

  • | CDN-U | Additional call signalling module with door opening capability

    | CDN-U | Additional call signalling module with door opening capability

    The module enables automatic and remote (with outside button) door opening without establishing connection as well as connection of acoustic or visual ringing signal. The module is usually fitted in the apartment. It is compatible with all digital systems from CDN, Inspiro and Familio P/PV range.

    Reliability, durability and innoviation are trademarks of ACO brand

  • | CDN-WZ |Short circuit and damage detection module

    | CDN-WZ |Short circuit and damage detection module

    The module is used to detect a line short circuit or a defective receiver/uniphone. It has 5 independently controlled outputs, to which a receiver or a group of receivers can be connected directly. The output on which a short circuit or a damaged receiver is automatically disconnected from the main line, thus preventing the entire door entry system from failing. The fault on any of the outputs is indicated by the LED light. When the short-circuit is eliminated, the module will automatically restart the output.


    In selected models of devices it is possible to mount directly in a frame or box.


    Compatible with digital group control panels: CDNP, Inspiro and Familio P.

  • | MOD-SPK-P | Built-in main unit module

    | MOD-SPK-P | Built-in main unit module

    Audio talk module, without its own buttons, for fitting into fronts with external call buttons. Used, for example, to connect a mailbox to a door entry system. External call buttons should be connected using a dedicated MOD-10NBP module. Extendable audio system in video after connecting a camera - optional MOD-CAM-COAX video module required.

    Compatible with digital devices from groups: CDN, Inspiro and Familio P./PV.

    Reliability, durability and innoviation are trademarks of ACO brand.

  • | MOD-10NBP | External buttons connection module

    | MOD-10NBP | External buttons connection module

    External buttons connect to this module in order to make directly dial an apartment number. Up to 10 buttons can be connected to the module and they are programmed via ACO's computer software. More modules can be connected together in order to operate more buttons. The module is compatible also with NO switches that are connected with one common wire (GND). The MOD-10NBP is compatible with CDN, INSPIRO and Familio P/PV outside stations and with built-in module MOD-SPK-P.

    Reliability, durability and innoviation are trademarks of ACO brand.

  • | MOD-CAM-FAM | Built-in dome camera module with integrated video combiner

    | MOD-CAM-FAM | Built-in dome camera module with integrated video combiner

    Built-in dome camera module. Used e.g. in fronts with external call buttons or to connect a mailbox with a video door entry system. It can also be used as a spare part for panels such as the one build in: Familio PV / PRO or COMO-PRO-V (the same camera module is available in these panels). Color camera with high resolution (min. 600 lines), with 2.8 mm wide-angle lens.

    Adjustable camera viewing direction, including IR LED backlighting, +/- 20° in each direction. Excellent day and night images.

    Compatible with built-in module: MOD-SPK-PRO (G3).

  • | MOD-CAM-COAX | Dome camera module with PAL coaxial output

    | MOD-CAM-COAX | Dome camera module with PAL coaxial output

    Dome camera module for front installation with external call buttons. Used, for example, to connect a mailbox with a video door entry system. Features: heated, high resolution color camera (min. 600 lines) with 2.8 mm wide-angle lens. Adjustable position of the camera's observation direction, including IR LED illumination +/- 20° in each direction. Excellent image day and night. Video output is a coaxial PAL (75 Ohm) signal.
    Compatible with built-in modules: MOD-SPK-P, MOD-SPK-PRO.

  • | MOD-DC-12V | Voltage converter from 14-16VDC to 12VDC / 0.5A (for reversing electric door strikes)

    | MOD-DC-12V | Voltage converter from 14-16VDC to 12VDC / 0.5A (for reversing electric door strikes)

    The voltage converter module converts the voltage from 14 - 16VDC to 12VDC with a maximum load of 0.5A. It is designed mainly for supplying reversing electric strikes that require 12VDC supply voltage. In ACO devices set in the mode of operation with a reversible electric striker, a voltage of the device supply voltage appears on the output for connecting the electric striker. In case of using a reversing electric door strike that requires exact voltage of 12VDC and using 15VDC supply or from a transformer, a converter module should be used.

  •  | CDNV-RJ45 | Converter RJ45 → ARK

    | CDNV-RJ45 | Converter RJ45 → ARK

    The module allows to switch from RJ45 to ARK screw connectors in digital video systems.
    It allows to increase the cable cross sections up to 2.5mm² Line ("Line +" and "Line -").
    The cross section of the Line affects the maximum distance between the panel and the farthest receiver - maximum distance up to 1000m.

    Compatible with all ACO video systems.

  • | PNT2-FAM-PRO/PV | Surface-mounting box with roof

    | PNT2-FAM-PRO/PV | Surface-mounting box with roof

    Large surface-mounted box with roof for Familio PRO/PV

    Familio panels are dedicated to single and multi-family houses. The combination of modern technology with brushed stainless steel creates timeless solutions addressed to individual customers who value design and functionality.

  • | PNT2-FAM-P | Surface-mounting box with a roof

    | PNT2-FAM-P | Surface-mounting box with a roof

    Small surface-mounted box for Familio P

    Familio panels are dedicated to single and multi-family houses. The combination of modern technology with brushed stainless steel creates timeless solutions addressed to individual customers who appreciate design and functionality.

  • | FAM-R-S-NT/PT | Flush-mounted Familio P converter

    | FAM-R-S-NT/PT | Flush-mounted Familio P converter

    Converter for Familio P panels - allows to obtain a flush-mounted version with a protective roof from the surface version

    Familio panels are dedicated to single and multi-family houses. The combination of modern technology with brushed stainless steel creates timeless solutions addressed to individual customers who appreciate design and functionality.

  • | FAM-M-M | FAM-PV/PRO cover plate

    | FAM-M-M | FAM-PV/PRO cover plate

    In case there is too big hole left after the previous device - masks it, allowing for esthetic and quick installation of the Familio panel

    Familio panels are dedicated to single and multi-family houses. The combination of modern technology with brushed stainless steel creates timeless solutions addressed to individual customers who appreciate design and functionality.

  • | FAM-M-S | FAM-P cover plate

    | FAM-M-S | FAM-P cover plate

    In case there is too big hole left after the previous device - masks it, allowing for esthetic and quick installation of the Familio panel

    Familio panels are dedicated to single and multi-family houses. The combination of modern technology with brushed stainless steel creates timeless solutions addressed to individual customers who appreciate design and functionality.

  • | FAM-M2-M | FAM-PV/PRO cover plate

    | FAM-M2-M | FAM-PV/PRO cover plate

    In case there is too big hole left after the previous device - masks it, allowing for esthetic and quick installation of the Familio panel

    Familio panels are dedicated to single and multi-family houses. The combination of modern technology with brushed stainless steel creates timeless solutions addressed to individual customers who appreciate design and functionality.

  • | FAM-M2-S | FAM-P cover plate

    | FAM-M2-S | FAM-P cover plate

    In case there is too big hole left after the previous device - masks it, allowing for esthetic and quick installation of the Familio panel

    Familio panels are dedicated to single and multi-family houses. The combination of modern technology with brushed stainless steel creates timeless solutions addressed to individual customers who appreciate design and functionality.

  •  | FAM-PP-M |  Additional flush-mounted box

    | FAM-PP-M | Additional flush-mounted box

    Additional flush-mounted box medium for mounting Familio panels

    Familio panels are dedicated to single and multi-family houses. The combination of modern technology with brushed stainless steel creates timeless solutions addressed to individual customers who appreciate design and functionality.

  • | FAM-PP-S | Additional flush-mounted box

    | FAM-PP-S | Additional flush-mounted box

    Additional small flush-mounted box for mounting Familio panels

    Familio panels are dedicated to single and multi-family houses. The combination of modern technology with brushed stainless steel creates timeless solutions addressed to individual customers who appreciate design and functionality.

  • | PS65-15 DIN | DC power supply unit for DIN rail, with PE connection

    | PS65-15 DIN | DC power supply unit for DIN rail, with PE connection

    Universal DC power supply with DIN rail mounting and PE terminal connection. Power supply dedicated for ACO products, for video and audio systems: CDNP, INSPIRO+, Familio/COMO (P/PV/PRO), as well as for systems where active (powered) audio receivers are used, such as INS-UP720MR, UP800.

  • | PS-MDR-20-15 | DC power supply on DIN rail, with PE connection.

    | PS-MDR-20-15 | DC power supply on DIN rail, with PE connection.

    Universal DC power supply with DIN rail mounting and PE terminal connection. Power supply dedicated for ACO products, for video and audio systems: CDNP, INSPIRO+, Familio/COMO (P/PV/PRO), as well as for systems where active (powered) audio receivers are used, such as INS-UP720MR, UP800.

  • | PS45-15-PRO-13 | Power supply with video splitter for Familio PRO system

    | PS45-15-PRO-13 | Power supply with video splitter for Familio PRO system

    Power supply with built-in video splitter for up to 3 monitors, dedicated for Familio PRO system. Can be used in one, two, or three family buildings, to power the entire video intercom system. Compatible with other ACO video systems. It can be connected with RJ-45 connectors or alternatively with ARK screw connectors.

    Reliability, innovation and durability are the hallmarks of the ACO brand.

  • | PS-HDR-60-15MA | DC power supply

    | PS-HDR-60-15MA | DC power supply

    DC power supply unit with DIN rail mounting option. Power supply dedicated for ACO products, for video and audio systems: CDNP, INSPIRO+, Familio/COMO (P/PV/PRO), as well as for systems where active (powered) audio receivers are used, such as INS-720MR, UP800.

  • | PS18-15 ZW | DC power supply unit in plug housing

    | PS18-15 ZW | DC power supply unit in plug housing

    PS18-15 ZW - DC power supply, 15VDC, 1.25A.
    Power supply dedicated to the acoGO! P-IP WiFi gateway.

  • | MOD-PE-GND | Decoupling filter for door entry systems

    | MOD-PE-GND | Decoupling filter for door entry systems

    Interference filter module for door entry systems, recommended for use with power supplies that do not have a PE terminal (e.g. PS-HDR-60-15).

    The module should be used in case of network noise (commonly referred to as "buzzing" or "audio interference"), which appears most frequently in handsfree receivers.

    The module is connected to the ground of the electrical installation (PE protective earth wire) and the ground (GND/-DC) of the door entry system. In the case of common ground for the entire intercom system, one module can be used.

  • Transformer | TR 11,5V 1,2A |

    Transformer | TR 11,5V 1,2A |

    Mains transformer with 230V socket plug.

    Dedicated only for audio systems: CDN, INSPIRO+, Familio P in case of using passive receivers e.g. INS-UP, INSUA, INS-UC, INS-UP720B,M,BX, INS-UA720M, INS-UC720M.

  • | TR DIN 11,5V 1,2A | Transformer

    | TR DIN 11,5V 1,2A | Transformer

    DIN rail transformer for ACO products

    Transformer dedicated only for audio systems: CDN, INSPIRO+, Familio P when using passive receivers e.g. INS-UP, INS-UP720.

  • | TR DIN 11,5V 2A | Transformer

    | TR DIN 11,5V 2A | Transformer

    DIN rail transformer for ACO products

    Transformer dedicated only for audio systems: CDN, INSPIRO+, Familio P when using passive receivers e.g. INS-UP, INS-UP720.

  • | CDN-USB | Programming cable

    | CDN-USB | Programming cable

    USB cable used for programing digital systems using computers.

    Cable dedicated for systems CDNP ( form version 5.0 ), CDNV, CDNWS, INSPIRO-audio, INSPIRO-video, INSPIRO-WS.

    Detailed information about devices acn be found in the catalog.

  • | FAM-MPRO 7-S | Desk stand for 7” video inside unit

    | FAM-MPRO 7-S | Desk stand for 7” video inside unit

    The stand is made of brushed stainless steel and is designed to fit video inside unit with glass front.

    ACO receivers are solid devices, made from the best materials, functional and easy to operate.

    Reliability, durability and innoviation are trademarks of ACO brand.

  • | CDN-Tee | RS Tee

    | CDN-Tee | RS Tee

    Splitter for ACO system modules - necessary when more than two additional modules are connected to the control panel via EXTMOD/RS port.

  • | TR-ACO  | Proximity key ring

    | TR-ACO | Proximity key ring

    Proximity key ring in UNIQUE 125 kHz standard.

    Key ring dedicated for any ACO system equipped with a proximity reader and for other devices working in this standard.

  • | TR-ACO-KT | Proximity card

    | TR-ACO-KT | Proximity card

    Proximity card on standard UNIQUE 125 kHz.

    Card dedicated for all ACO systems equipped with proximity reader and to other devices that work in this standard