« Back to the main page
  • | PRO-VIDEO-SW2–60 (G3) | Additional camera switch

    | PRO-VIDEO-SW2–60 (G3) | Additional camera switch

    Additional camera switch module in PRO system. Enables connecting up to 4 additional cameras. Each switch supports one additional camera. The cameras can be operated globally by all monitors or individually for each monitor address as long as the sum of all supported cameras in the system is less than or equal to 4. Switching the image from the individual cameras is done with the "monitor" icon/button. Designed for mounting in an electrical box Ø60mm. Compatible with all COMO/ Familio PRO, PRO-A devices.

    The module is also required when connecting two panels of the COMO-PRO Master and Slave (it is used to switch the camera images of individual panels).

    This is the next generation of the module (G3), which supports, among other things, a larger number of addresses (e.g. for GLASS-PRO-7 series monitors), and also enables programming of settings and software update on the system bus using a computer.

    Reliability, innovation and durability are the hallmarks of the ACO brand.

  • | VIDEO-SW2 MINI–60  | Additional camera switch for Ø60 mm cable box

    | VIDEO-SW2 MINI–60 | Additional camera switch for Ø60 mm cable box

    Additional camera switch module in the PRO digital system. It allows to configure cooperation between video monitors having the same addresses or a common reaction of video monitors present in a system. Each switch operates one additional camera.
    Cameras can be operated globally or individually for each address, provided the total number of all operated cameras is maximum four.
    Video feeds from individual cameras are switched using the “monitor” icon / button.
    The module comes without an enclosure to be mounted in a Ø60 mm diameter cable box.
    Compatible with all devices from the Familio PRO
    range.

    Reliability, innovativeness and durability are ACO's characteristic features.

  • | CDNVRau-DIN  | Active video splitter for DIN rail

    | CDNVRau-DIN | Active video splitter for DIN rail

    Active splitter for DIN rail. It has 4 active outputs (amplifiers) and one passive output (no amplifier). It allows connection of up to 5 inside units or splitting the bus line into 4 independent outputs. It is also possible to connect another splitter or to terminate the line with the main jumper.
    Active outputs make possible connecting the inside units within 70 m distance (when the configuration is done properly).
    One of the active outputs is additionally strengthened which allows to level down video signal losses on long bus lines.
    The audio line can be connected with additional screw terminals.
    The module can be mounted on the floors, in central points or where the bus line is split.
    It can be powered up from the bus line or from an external 15V PSU (integrated jumper that cuts off power from the bus line).
    The splitter is resistant to the cabling damages (short circuit of the power line with audio or video line)
    It takes space of 4 DIN modules.
    Compatible with chosen digital devices from: CDN, Inspiro and Familio groups.

  • | CDNVRau4-60 | Universal 4-output active splitter - for Ø60 mm electrical box

    | CDNVRau4-60 | Universal 4-output active splitter - for Ø60 mm electrical box

    Universal distributor with active video amplifiers for digital systems. It enables connection of four receivers or separation of the main bus into four independent outputs. It is also possible to connect another distributor or terminate the bus. The maximum distance between the receiver and the distributor is 70m.
    Mounted on floors, at the installation's assembly point or at the bus distribution point.
    Module without housing for installation in a Ø60 mm electrical box.
    Compatible with digital devices from groups: CDNP, Inspiro, Familio P/PV and COMO PRO/PRO-A.

  • | CDNVS-60 |  Video combiner - to an installation box Ø60 mm

    | CDNVS-60 | Video combiner - to an installation box Ø60 mm

    Video combiner for digital systems. Used when there is a need to connect an external analog camera or other video source to systems without a camera. The module converts the PAL signal into a differential video signal (transmitted via a cat. 5e or 6 twisted pair cable). It can also be used to connect a second camera: in INS-MP7 monitors or to the camera switch module (VIDEO-SW2 MINI-60).
    Module without housing for mounting in a Ø60 mm installation box.
    Compatible with digital group devices: CDNP, Inspiro and Familio.